The Morelli Full Self-Ligating Archwires Single Patient Kit holds the complete archwire sequence for one case treated with self-ligating brackets. It combines Superelastic NiTi, Heat Activated NiTi, CrNi and TMA wires in 10 different pairs β 20 archwires in total β ordered from the lightest round wire through to the rectangular finishing wires.
Key Features
Ten paired sizes β each size in the kit is supplied as one upper and one lower archwire, for 20 wires in total.
Four alloys in one sequence β Superelastic NiTi and Heat Activated NiTi, thermally activated above 27 Β°C (80.6 Β°F), for alignment and leveling, CrNi for stabilization, and TMA for finishing.
Round to rectangular progression β the round wires align and level without expressing torque; the rectangular wires fill the slot and take over third-order control.
Matched to self-ligating systems β the sequence and force levels are selected for low-friction, clip-retained brackets.
Single-patient organization β one kit covers one case from start to finish, simplifying chairside handling and stock control.
Instructional packaging β the box itself is a booklet describing each archwire in the sequence and its respective forces.
Technical Specifications
Material: NiTi (Nickel-Titanium), CrNi (Nickel-Chromium), TMA (Titanium-Molybdenum)
Superelastic NiTi: Γ.010β³ (0,25 mm)
Thermo-Plus NiTi: Γ.012β³ (0,30 mm), Γ.014β³ (0,35 mm), Γ.016β³ (0,40 mm), .016β³ Γ .016β³ (0,40 Γ 0,40 mm), .016β³ Γ .022β³ (0,40 Γ 0,55 mm), .017β³ Γ .025β³ (0,43 Γ 0,63 mm), .021β³ Γ .025β³ (0,53 Γ 0,63 mm)
CrNi: .019β³ Γ .025β³ (0,48 Γ 0,63 mm)
TMA: .017β³ Γ .025β³ (0,43 Γ 0,63 mm)
Slot: .022β³
Activation Temperature: Above 27 Β°C (80.6 Β°F) β oral environment temperature
Purpose: Predefined archwire exchange sequence for a single self-ligating orthodontic case
Certifications: FDA Approved, CE Approved, ISO 9001:2015, ISO 13485:2016
Country of Manufacture: Brazil
Package Includes: 20 archwires β 10 different pairs, each pair with one upper and one lower wire: Superelastic NiTi Γ.010β³; Heat Activated NiTi Γ.012β³, Γ.014β³, Γ.016β³, .016β³ Γ .016β³, .016β³ Γ .022β³, .017β³ Γ .025β³ and .021β³ Γ .025β³; CrNi .019β³ Γ .025β³; TMA .017β³ Γ .025β³
Clinical Applications
Full-case treatment with self-ligating brackets, from initial alignment through to finishing, using a single kit per patient.
Sequential archwire exchange at each appointment, following the round-to-rectangular progression built into the kit.
Crowding, rotation, deep bite, open bite, crossbite, and diastema cases that require a complete wire progression rather than isolated sizes.
Why choose the Morelli full self-ligating kit?
Because it puts an entire patientβs archwire sequence in one box β four alloys, ten paired sizes, upper and lower β removing guesswork from wire selection and keeping stock control simple.
